NEWS CENTER

MOLD REVIEW

2021-08-23 16:37

The purpose for this TQ & DFM , is to develop a thought-out die cast die design and achieve a quality tool, built for us, that will produce quality parts for several years. Through this process, we are developing a DCI standards for mold design and mold construction. With suppliers having a copy of these standards before quoting molds for us, it will reduce many of the questions up front, and having less changes to make in the design. Yes, these standard can be sent to us with quotation. So we can quote the mold accordingly.

The purpose for this  TQ & DFM , is to develop a thought-out die cast die design and achieve a quality tool, built for us, that will produce quality parts for several years.

Through this process, we are developing a DCI standards for mold design and mold construction.  With suppliers having a copy of these standards before quoting molds for us, it will reduce many of the questions up front, and having less changes to make in the design.    Yes, these standard can be sent to us with quotation. So we can quote the mold accordingly.

Other news

Laser cut sensor aluminum die cast parts

2023-11-17 16:23

A laser sensor is a sensor that uses laser technology to detect, measure or sense. Laser cutting sensor aluminum die-cast parts requires some key considerations to ensure a high-quality cutting process. It uses a laser beam as the main sensing element to collect information about the surrounding environment or target objects. Laser sensors are known for their precision, accuracy, speed and non-contact nature, making them suitable for a wide range of applications. Here are some key aspects of laser sensors:

See more information

Gravity casting series mold design and product processing

2023-09-14 12:41

Summarize: 1. Before processing, it is necessary to detect the hardness of the body, stretch the test rod, and confirm that it is qualified before processing 2. Castings are tested for Brinell hardness according to ISO 6506-1, and the control range is above 85HB 3. The castings have been inspected by radiographs and conform to the third-level standard of ISO10049 4. The thickness of the coating must be 80-100 microns 5. Castings are subjected to salt spray test for 24 hours according to is09227 / astm b117, to ensure that no red rust is observed at the end of the salt spray test, once for each batch The spray masking tool needs to be re-customized

See more information
< 1234...37 > proceed page

HEADQUARTER ADD

904-905, China-base Building, No.666, Tiantong South Road, Ningbo 315100, China

AUTOMOTIVE DIVISION Add

NO. 45, Baofeng Road, Eastern Suburb Development Zone, Fenghua 315500, China

ALUMINUM FORGING DIVISION ADD

Shaojiadu Street, Linhai City,Zhejiang Province 317000, China

INNOVAW LPDC/GPDC division

No. 288, Fengchuan Avenue, Tonglu, Hangzhou, Zhejiang, China

Copyright 2022 Inc. All rights reserved.