NEWS CENTER

Application Of Sn Plating On Zinc Alloy

2020-05-29 09:22

Sn plating is normally done to impart solderability to a variety of base metal substrates. It is a silvery, blue-white metal that is ductile, solderable, and covers very well. The solderability of tin can be affected by the substrate,

Sn plating is normally done to impart solderability to a variety of base metal substrates. It is a silvery, blue-white metal that is ductile, solderable, and covers very well. The solderability of tin can be affected by the substrate, since several metals (including brass and zinc) tend to react with and migrate into the tin forming relatively non-solderable intermetallic layers. Zinc will migrate into the tin and severely limit the shelf life of the finished parts. This migration can be mitigated by the common practice of applying an undercoat of copper or nickel, or a combination of copper with a flash of nickel through which the zinc cannot migrate.

Tin has a typical thickness of .0011”. In general, matte tin has better solderability but bright tin is specified more because of its appearance. Tin does not tarnish easily, making it a good choice as a decorative finish.

Classic cases

This product uses the following processing methods

1.NO BURRS PERMITTED

2.PIATING:

   UNDERLAYER:3-5 μm Ni OVER 8-12 μm Cu

   TOPLAYER: 5-10 μm Sn

   SURFACE AREA:650 Imm2

3.MATERIAL:ZAMAK 3 (ASTM B86)

   VOLUME 4032mm3, WEIGHT 27g.

4.EJECTOR PIN MARKS RECESSED, 0.10MAX

5.DIMENSIONS WITHIN OVAL ARE INSPECTION DIMENSIONS.

6.SIGNIFICANT CHARACTERISTIC FOR PROCESS CAPAABILITY AND PROCESS CONTROL.

For customers' requirements, first of all, we have carried out technical analysis and technological improvement. The product is also in the efforts of colleagues in various departments, the customer is very satisfied, with our long-term cooperation, began mass production!

Chemcal analysis Hanging plating Hanging plating rolling plating
Film thickness detection at each step drying Salt spray test batch

 

Other news

Treatment Of Porosity And Impurities In Aluminum Alloy Die Castings

2017-08-10 15:17

Treatment of porosity and Impurities in Aluminum Alloy Die Castings Aluminum alloy die castings after welding porosity are more difficult to deal with, mainly impurities too much, precision die-castin

See more information

reduce deformation for aluminum alloy parts with CNC machining

2017-07-31 15:18

As the aluminum alloy parts make from aluminum casting or forging, of the thermal expansion coefficient of large, thin-walled process is easy to deformation. Especially in the use of free forging roug

See more information

Die casting is everywhere.

2017-07-28 15:37

A funny video that brings you around the die casting is amazing. Video in the bluefocus is all die casting parts, die-casting is everywhere around your life. and some people ask me what the die castin

See more information

which point should be paid attention to while use of alumininum die casting mold to extend tooling life?

2017-07-27 15:19

which point should be paid attention to while use of alumininum die casting mold to extend tooling life? In the use of aluminum alloy die-casting mold, the following points should be paid special atte

See more information

Strickland West, Styr Perez, Gauss Has Been Incorporated Into The Norican Group

2017-07-19 15:39

Norican Group is the world's leading supplier of metal parts (horizontal, double-sided formwork and vertical molding) and surface treatment technology (blasting, shot peening and batch polishing). The

See more information
< 1...333435...37 > proceed page

HEADQUARTER ADD

904-905, China-base Building, No.666, Tiantong South Road, Ningbo 315100, China

AUTOMOTIVE DIVISION Add

NO. 45, Baofeng Road, Eastern Suburb Development Zone, Fenghua 315500, China

ALUMINUM FORGING DIVISION ADD

Shaojiadu Street, Linhai City,Zhejiang Province 317000, China

INNOVAW LPDC/GPDC division

No. 288, Fengchuan Avenue, Tonglu, Hangzhou, Zhejiang, China

Copyright 2022 Inc. All rights reserved.