NEWS CENTER

New high bay LED housing and Bezel samples developed successfully

2017-05-04 15:25

New high bay LED housing and Bezel samples developed successfully.They are used for driving light.Both housing and bezel are made by high strength aluminum pressure die casting, surface are powder coa

New high bay LED housing and Bezel samples developed successfully.They are used for driving light.Both housing and bezel are made by high strength aluminum pressure die casting, surface are powder coated with AKZON NOBEL powder after the SURTEC 650 pre treatment with UV resistant. However, from the drivers’perspective,the real science is the combination of the LED’s and the optics.The sophisticated Contrl:emoji: optics condense the light by reducing non-functional stray beams.Coupled with a high-efficiency Luxeon LED they produce a performance that is unmatched internationally.Combination and Widr:emoji: beam patterns are available delivering up to 1 Lux at 1.4km.By investing in Nitro 140 Maxx’s you can be assured that you’ve made the right choice.
 
for more information, pls visit our website:  www.idiecasting.com 
 
nuoweinuowei

Other news

Laser cut sensor aluminum die cast parts

2023-11-17 16:23

A laser sensor is a sensor that uses laser technology to detect, measure or sense. Laser cutting sensor aluminum die-cast parts requires some key considerations to ensure a high-quality cutting process. It uses a laser beam as the main sensing element to collect information about the surrounding environment or target objects. Laser sensors are known for their precision, accuracy, speed and non-contact nature, making them suitable for a wide range of applications. Here are some key aspects of laser sensors:

See more information

Gravity casting series mold design and product processing

2023-09-14 12:41

Summarize: 1. Before processing, it is necessary to detect the hardness of the body, stretch the test rod, and confirm that it is qualified before processing 2. Castings are tested for Brinell hardness according to ISO 6506-1, and the control range is above 85HB 3. The castings have been inspected by radiographs and conform to the third-level standard of ISO10049 4. The thickness of the coating must be 80-100 microns 5. Castings are subjected to salt spray test for 24 hours according to is09227 / astm b117, to ensure that no red rust is observed at the end of the salt spray test, once for each batch The spray masking tool needs to be re-customized

See more information
< 1234...36 > proceed page

HEADQUARTER ADD

904-905, China-base Building, No.666, Tiantong South Road, Ningbo 315100, China

AUTOMOTIVE DIVISION Add

NO. 45, Baofeng Road, Eastern Suburb Development Zone, Fenghua 315500, China

ALUMINUM FORGING DIVISION ADD

Shaojiadu Street, Linhai City,Zhejiang Province 317000, China

INNOVAW LPDC/GPDC division

No. 288, Fengchuan Avenue, Tonglu, Hangzhou, Zhejiang, China

Copyright 2022 Inc. All rights reserved.