vacuum metallized aluminum reflector
2017-11-09 14:56
all reflectors made by aluminum high pressure die casting, including HID reflectors, HALOGEN reflectors, and FLUSHMOUNT reflectors. inside working surface for reflectors are polished and surface treat
all reflectors made by aluminum high pressure die casting, including HID reflectors, HALOGEN reflectors, and FLUSHMOUNT reflectors. inside working surface for reflectors are polished and surface treated by vacuum metallization to reach the good lighting performance.the vacuum metallization can resist more than 200 celsius degree high temperature and reflectors used for automotive and working lights.for more information, pls visit our website: www.idiecasting.com
Other news
Gravity casting series mold design and product processing
2023-09-14 12:41
Summarize: 1. Before processing, it is necessary to detect the hardness of the body, stretch the test rod, and confirm that it is qualified before processing 2. Castings are tested for Brinell hardness according to ISO 6506-1, and the control range is above 85HB 3. The castings have been inspected by radiographs and conform to the third-level standard of ISO10049 4. The thickness of the coating must be 80-100 microns 5. Castings are subjected to salt spray test for 24 hours according to is09227 / astm b117, to ensure that no red rust is observed at the end of the salt spray test, once for each batch The spray masking tool needs to be re-customized
See more information
HEADQUARTER ADD
904-905, China-base Building, No.666, Tiantong South Road, Ningbo 315100, China
AUTOMOTIVE DIVISION Add
NO. 45, Baofeng Road, Eastern Suburb Development Zone, Fenghua 315500, China
ALUMINUM FORGING DIVISION ADD
Shaojiadu Street, Linhai City,Zhejiang Province 317000, China
INNOVAW LPDC/GPDC division
No. 288, Fengchuan Avenue, Tonglu, Hangzhou, Zhejiang, China
TEL
