Aluminum Prototypes Used For Yacht
2018-03-20 14:18
CNC machined direclty from the aluminum alloy 6061 T6 round bar finished and approved by customer. then we made a aluminum die casting mold to produce the mass production parts based on fixed design
CNC machined direclty from the aluminum alloy 6061 T6 round bar finished and approved by customer. then we made a aluminum die casting mold to produce the mass production parts based on fixed design according to prototypes.
Other news
Gravity casting series mold design and product processing
2023-09-14 12:41
Summarize: 1. Before processing, it is necessary to detect the hardness of the body, stretch the test rod, and confirm that it is qualified before processing 2. Castings are tested for Brinell hardness according to ISO 6506-1, and the control range is above 85HB 3. The castings have been inspected by radiographs and conform to the third-level standard of ISO10049 4. The thickness of the coating must be 80-100 microns 5. Castings are subjected to salt spray test for 24 hours according to is09227 / astm b117, to ensure that no red rust is observed at the end of the salt spray test, once for each batch The spray masking tool needs to be re-customized
See more informationHEADQUARTER ADD
904-905, China-base Building, No.666, Tiantong South Road, Ningbo 315100, China
AUTOMOTIVE DIVISION Add
NO. 45, Baofeng Road, Eastern Suburb Development Zone, Fenghua 315500, China
ALUMINUM FORGING DIVISION ADD
Shaojiadu Street, Linhai City,Zhejiang Province 317000, China
INNOVAW LPDC/GPDC division
No. 288, Fengchuan Avenue, Tonglu, Hangzhou, Zhejiang, China
TEL