NEWS CENTER

Aluminum Alloy Die Casting Storage Environment Requirements

2019-05-24 11:53

When people live in a dry environment, the skin will become very dry and require a lot of hydration. Therefore, the environment is very important. There are certain requirements for the storage envi

nuowei

  When people live in a dry environment, the skin will become very dry and require a lot of hydration. Therefore, the environment is very important. There are certain requirements for the storage environment of aluminum alloy die-casting parts. The phenomenon of black casting of alloy die-casting parts, today we will talk about the requirements of the storage environment of aluminum alloy die-casting parts;
1. Aluminum alloy die-casting parts need to be stored in a ventilated and dry place;
2.the storage of aluminum alloy die-casting parts must only store aluminum alloy die-casting parts, and aluminum alloy die-casting parts must not be in contact with other chemical elements;
3. because aluminum is a kind of active metal, it will change when the temperature changes, so avoid direct sunlight;
4.and the position of the aluminum alloy die-casting parts needs to be protected in all directions to prevent damage to the aluminum alloy die-casting parts;
5. Aluminum alloy die-casting parts shall not be in contact with water, and contact with water may make aluminum alloy die-casting parts black;
The above is the requirement for the storage environment of aluminum alloy die-casting parts, and I hope to help you.
 
Copyright statement: The content of the article is extracted from the network. If there is any infringement, please contact us to delete it!

Other news

Laser cut sensor aluminum die cast parts

2023-11-17 16:23

A laser sensor is a sensor that uses laser technology to detect, measure or sense. Laser cutting sensor aluminum die-cast parts requires some key considerations to ensure a high-quality cutting process. It uses a laser beam as the main sensing element to collect information about the surrounding environment or target objects. Laser sensors are known for their precision, accuracy, speed and non-contact nature, making them suitable for a wide range of applications. Here are some key aspects of laser sensors:

See more information

Gravity casting series mold design and product processing

2023-09-14 12:41

Summarize: 1. Before processing, it is necessary to detect the hardness of the body, stretch the test rod, and confirm that it is qualified before processing 2. Castings are tested for Brinell hardness according to ISO 6506-1, and the control range is above 85HB 3. The castings have been inspected by radiographs and conform to the third-level standard of ISO10049 4. The thickness of the coating must be 80-100 microns 5. Castings are subjected to salt spray test for 24 hours according to is09227 / astm b117, to ensure that no red rust is observed at the end of the salt spray test, once for each batch The spray masking tool needs to be re-customized

See more information
< 1234...37 > proceed page

HEADQUARTER ADD

904-905, China-base Building, No.666, Tiantong South Road, Ningbo 315100, China

AUTOMOTIVE DIVISION Add

NO. 45, Baofeng Road, Eastern Suburb Development Zone, Fenghua 315500, China

ALUMINUM FORGING DIVISION ADD

Shaojiadu Street, Linhai City,Zhejiang Province 317000, China

INNOVAW LPDC/GPDC division

No. 288, Fengchuan Avenue, Tonglu, Hangzhou, Zhejiang, China

Copyright 2022 Inc. All rights reserved.