NEWS CENTER

Advantages Of Zinc Alloy Die Casting

2019-06-06 11:52

At present, with the development of society, more and more product accessories are made of zinc alloy, and the zinc alloy die casting is also popular, so why zinc alloy die casting can be widel

nuowei

 
     At present, with the development of society, more and more product accessories are made of zinc alloy, and the zinc alloy die casting is also popular, so why zinc alloy die casting can be widely used?
1. Zinc alloy die casting is one-step molding, so the production efficiency is high and the market demand can be quickly met.
2.high precision, zinc alloy material casting performance, can die casting a variety of sophisticated zinc alloy die casting.
3. zinc alloy material can be recycled, so economic and environmental protection, in line with our sustainable development.
4. Zinc alloy die castings have active chemical properties, so they can be used for surface treatment. After treatment, the products have strong texture, high-end and atmosphere, and can also meet people's personalized requirements.
5.The die casting industry in China is becoming more and more mature, so it is widely used.
     Zinc alloy die casting has the advantages mentioned above, so zinc alloy die casting is widely used in various industries, not only to enrich our country, but also to make the die casting industry more mature, so that some non-renewable resources are replaced.
 
 

Other news

Laser cut sensor aluminum die cast parts

2023-11-17 16:23

A laser sensor is a sensor that uses laser technology to detect, measure or sense. Laser cutting sensor aluminum die-cast parts requires some key considerations to ensure a high-quality cutting process. It uses a laser beam as the main sensing element to collect information about the surrounding environment or target objects. Laser sensors are known for their precision, accuracy, speed and non-contact nature, making them suitable for a wide range of applications. Here are some key aspects of laser sensors:

See more information

Gravity casting series mold design and product processing

2023-09-14 12:41

Summarize: 1. Before processing, it is necessary to detect the hardness of the body, stretch the test rod, and confirm that it is qualified before processing 2. Castings are tested for Brinell hardness according to ISO 6506-1, and the control range is above 85HB 3. The castings have been inspected by radiographs and conform to the third-level standard of ISO10049 4. The thickness of the coating must be 80-100 microns 5. Castings are subjected to salt spray test for 24 hours according to is09227 / astm b117, to ensure that no red rust is observed at the end of the salt spray test, once for each batch The spray masking tool needs to be re-customized

See more information
< 1234...36 > proceed page

HEADQUARTER ADD

904-905, China-base Building, No.666, Tiantong South Road, Ningbo 315100, China

AUTOMOTIVE DIVISION Add

NO. 45, Baofeng Road, Eastern Suburb Development Zone, Fenghua 315500, China

ALUMINUM FORGING DIVISION ADD

Shaojiadu Street, Linhai City,Zhejiang Province 317000, China

INNOVAW LPDC/GPDC division

No. 288, Fengchuan Avenue, Tonglu, Hangzhou, Zhejiang, China

Copyright 2022 Inc. All rights reserved.