NEWS CENTER

Die casting details

2024-02-27 16:09

Structural strength of the mold In order to reduce the manufacturing cost of the mold, it is not advisable to forcibly reduce the size of the mold material. Reducing the size only reduces the cost of materials, while other processing costs remain basically unchanged. The biggest impact is the strength of the mold. If the strength is not enough, it is directly related to the deformation of the entire mold during production and the stability of the operation of core pulling, ejection and other mechanisms. Therefore, the size plays a decisive role in the quality of the product, and may even cause the mold to not be put into production. Therefore, the sufficient strength of the mold structure is an important guarantee for normal and stable production.

See more information

Integrated evolution process of large-scale integrated die-casting parts based on mold flow analysis

2024-01-26 17:01

Integrated evolution process of large-scale integrated die-casting parts based on mold flow analysis

See more information

Laser cut sensor aluminum die cast parts

2023-11-17 16:23

A laser sensor is a sensor that uses laser technology to detect, measure or sense. Laser cutting sensor aluminum die-cast parts requires some key considerations to ensure a high-quality cutting process. It uses a laser beam as the main sensing element to collect information about the surrounding environment or target objects. Laser sensors are known for their precision, accuracy, speed and non-contact nature, making them suitable for a wide range of applications. Here are some key aspects of laser sensors:

See more information

Gravity casting series mold design and product processing

2023-09-14 12:41

Summarize: 1. Before processing, it is necessary to detect the hardness of the body, stretch the test rod, and confirm that it is qualified before processing 2. Castings are tested for Brinell hardness according to ISO 6506-1, and the control range is above 85HB 3. The castings have been inspected by radiographs and conform to the third-level standard of ISO10049 4. The thickness of the coating must be 80-100 microns 5. Castings are subjected to salt spray test for 24 hours according to is09227 / astm b117, to ensure that no red rust is observed at the end of the salt spray test, once for each batch The spray masking tool needs to be re-customized

See more information
< 1234...19 > proceed page

HEADQUARTER ADD

904-905, China-base Building, No.666, Tiantong South Road, Ningbo 315100, China

AUTOMOTIVE DIVISION Add

NO. 45, Baofeng Road, Eastern Suburb Development Zone, Fenghua 315500, China

ALUMINUM FORGING DIVISION ADD

Shaojiadu Street, Linhai City,Zhejiang Province 317000, China

INNOVAW LPDC/GPDC division

No. 288, Fengchuan Avenue, Tonglu, Hangzhou, Zhejiang, China

Copyright 2022 Inc. All rights reserved.